Cisco ASR 9000 Series Command Reference

BNG DHCP Commands
This module describes the Cisco IOS XR software commands used to configure the DHCP commands for
Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the related
configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway
Configuration Guide.
•
address-pool, page 141
•
aftr-name, page 142
•
broadcast-flag policy check (BNG), page 143
•
class, page 145
•
dhcp ipv4 (BNG), page 147
•
dhcp ipv6 (BNG), page 148
•
dhcpv6 address-pool, page 149
•
dhcpv6 delegated-prefix-pool, page 151
•
dns-server (BNG), page 152
•
domain-name (DHCP IPv6 pool-BNG), page 154
•
duplicate-mac-allowed, page 156
•
framed-prefix-pool, page 158
•
helper-address (BNG), page 159
•
inner-cos, page 161
•
interface (DHCP-BNG), page 162
•
interface subscriber-pppoe profile, page 164
•
lease, page 165
•
lease proxy client-lease-time, page 167
•
limit lease per-circuit-id, page 169
•
limit lease per-interface, page 171
•
limit lease per-remote-id, page 173
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
139

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model