Cisco ASR 9000 Series Command Reference

subscriber redundancy
To enable subscriber redundancy feature globally in BNG and to enter the subscriber redundancy configuration
sub mode, use the subscriber redundancy command in Global Configuration mode. To remove the
configurations for subscriber redundancy feature in BNG, use the no form of this command.
subscriber redundancy
no subscriber redundancy
This command has no keywords or arguments.
Command Default
None
Command Modes
Global configuration.
Command History
ModificationRelease
This command was introduced.Release 5.2.2
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes appropriate task
IDs. If the user group assignment is preventing you from using a command, contact your AAA administrator
for assistance.
The option slave-mode is not supported in BNG geo redundancy. The default redundancy mode is hot-standby.
Task ID
OperationTask ID
read, writeconfig-services
Examples
This example shows how to enter subscriber redundancy sub mode to configure subscriber redundancy options:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# subscriber redundancy
RP/0/RSP0/CPU0:router(config-subscr-red)#
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
525
Subscriber Commands
subscriber redundancy

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model