Cisco ASR 9000 Series Command Reference

show policy-map
To show the policy-map related information, use the show policy-map command in the EXEC mode.
show policy-map type control subscriber pmap-name name
Syntax Description
Displays the type of policy-map.type
Displays the control type policy-map.control
Displays the subscriber control type policy-map.subscriber
Specifies the policy-map name.pmap_name
Displays the policy map name.
name
Command Default
None
Command Modes
EXEC mode
Command History
ModificationRelease
This command was introduced.Release 4.2.0
Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readqos
Examples
This is a sample output of the show policy-map command in the EXEC mode:
RP/0/RSP0/CPU0:router# show policy-map control subscriber pmap-name POLICY1
The show policy-map output is as follows:
Wed Jan 23 08:56:13.794 GMT
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
137
Control Policy Commands
show policy-map

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model