Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
execmulticast
Examples
This is an example of using the clear igmp unicast-qos-adjust command:
RP/0/RSP0/CPU0:router# clear igmp unicast-qos-adjust rate interface Loopback 1
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
352
Multicast Commands
clear igmp unicast-qos-adjust
To Next Page
Loading...
