Cisco ASR 9000 Series Command Reference

This example shows how to configure a pppoe session limit of 8000 and a threshold value of 7500, for each
circuit-id in a PPPoE BBA-Group:
RP/0/RSP0/CPU0:router# configure
RP/0/RSP0/CPU0:router(config)# pppoe bba-group bba1
RP/0/RSP0/CPU0:router(config-bbagroup)# sessions circuit-id limit 8000 threshold 7500
Related Commands
DescriptionCommand
Configures a throttle value for PPPoE sessions for a PPPoE
BBA-Group in BNG.
pppoe sessions throttle, on page 460
Shows the PPPoE session limit information.show pppoe limits, on page 466
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
459
PPPoE Commands
pppoe sessions limit

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model