Cisco ASR 9000 Series Command Reference

Usage Guidelines
To use this command, you must be in a user group associated with a task group that includes the proper task
IDs. If you suspect user group assignment is preventing you from using a command, contact your AAA
administrator for assistance.
Task ID
OperationTask ID
readppp
Examples
This is the sample output of the show pppoe throttles command:
RP/0/RSP0/CPU0:router# show pppoe throttles location 0/2/cpu0
BBA-Group TEST
--------------
MAC throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
MAC Address State left reset PADI PADR
----------- ----- ---- ----- ---- ----
aabb.ccdd.1123 Idle 30s 16s 0 0
7582.1352.e29a Monitor 3s 20s 5 5
7582.1352.e29a Block 4s 17s 6 5
MAC Access-interface throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
Access-Int MAC Address State left reset PADI PADR
---------- ----------- ----- ---- ----- ---- ----
GE0/1/0/0 aabb.ccdd.1123 Idle 30s 16s 0 0
GE0/1/0/0 7582.1352.e29a Monitor 3s 20s 5 5
GE0/1/0/0 7582.1352.e29a Block 4s 17s 6 5
MAC IWF throttle information:
Max packets per request period: 5
Request period duration: 20s
Blocking period duration: 5s
Time Since
MAC Address State left reset PADI PADR
----------- ----- ---- ----- ---- ----
aabb.ccdd.1123 Idle 30s 16s 0 0
7582.1352.e29a Mon 3s 20s 5 5
7582.1352.e29a Block 4s 17s 6 5
BBA-Group TEST2
--------------
MAC throttling is not configured.
MAC Access-interface throttling is not configured.
MAC IWF throttling is not configured.
Another sample output of the show pppoe throttles command:
RP/0/RSP0/CPU0:router# show pppoe throttles
BBA-Group BNG_BBA1
------------------
MAC throttles not configured.
MAC-Access-interface throttles not configured.
MAC-IWF-Access-interface throttles not configured.
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
476
PPPoE Commands
show pppoe throttles

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model