Cisco ASR 9000 Series Command Reference

QOS Commands
This module describes the Cisco IOS XR software commands used to configure the QoS commands for
Broadband Network Gateway (BNG) on the Cisco ASR 9000 Series Router. For details regarding the related
configurations, refer to the Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway
Configuration Guide.
•
qos account, page 480
•
qos output minimum-bandwidth, page 482
•
service-policy (QoS-BNG), page 484
•
service-policy (interface BNG), page 486
•
shape average (BNG), page 489
•
show qos inconsistency (BNG), page 491
•
show qos interface (BNG), page 494
•
show qos shared-policy-instance (BNG), page 504
•
show qos summary BNG, page 506
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
479

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model