Cisco ASR 9000 Series - Page 506

ModificationRelease
The command was supported in dynamic template configuration
mode in BNG.
Release 4.3.0
Usage Guidelines
To enter the dynamic template configuration mode, run dynamic-template command in the Global
Configuration mode.
Task ID
OperationsTask ID
readqos
Examples
This example provides detail about QoS policy inconsistency, for all warning types:
RP/0/RSP0/CPU0:router# show qos inconsistency detail 0 location 0/7/CPU0
Interface Lists with QoS Inconsistency Warning:
=========================================================
Node 0/7/CPU0
---------------------------------------------------------
Interfaces with QoS Inconsistency: ANCP - No Shaper at top policymap
==========================================================================
Interface Direction Policy Name SPI Name
--------------------------------------------------------------------------
GigabitEthernet0/7/0/1.5 output parent-none
Interfaces with QoS Inconsistency: ANCP - Downstream Rate less than Shaper Rate
==========================================================================
Interface Direction Policy Name SPI Name
--------------------------------------------------------------------------
GigabitEthernet0/7/0/1 output parent SPI1
GigabitEthernet0/7/0/1.2 output parent
GigabitEthernet0/7/0/1 output normal-policy-name normal-spi-name
This example displays summary counts of inconsistency warnings:
RP/0/RSP0/CPU0:router#
RP/0/RSP0/CPU0:router# show qos inconsistency summary location 0/7/CPU0
Summary Counts of QoS Inconsistency Warnings:
=========================================================
Node 0/7/CPU0
Inconsistency Warning Type Count
--------------------------------------------------------
ANCP - No Shaper at top policymap: 1
ANCP - Downstream Rate less than Shaper Rate: 4
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference,
Release 5.2.x
492
QOS Commands
show qos inconsistency (BNG)