Cisco ASR 9000 Series Command Reference

Table 27: show QoS interface Field Descriptions
DescriptionField
Level 0 class identifier in hexadecimal format.Level 0 class
Level 1 class identifier in hexadecimal format.Level 1 class
Name that was assigned to this class with the class
command.
class name
Number of conform packets transmitted.Conform
Configured burst size, expressed in bytes, gigabytes
(GB), kilobytes (KB), megabytes (MB), milliseconds
(ms), or microseconds (us).
Burst
Queue identifier.Queue ID
Child Policer conform action (transmitted or dropped).Child Policer Conform
Child Policer exceed action (transmitted or dropped).Child Policer Exceed
Child Policer violate action (transmitted or dropped).Child Policer Violate
Information pertaining to CAC actions, and UBRL.Flow QoS Info
Configured flow mask for CAC actions.CAC Flow Mask Mode
Configured rate for CAC actions.CAC Flow Rate
Configured total bandwidth for CAC admitted flows.CAC Rate
Configured flow mask for UBRL.UBRL Flow Mask Mode
Configured expiry time to purge out stale flow records
set in the flow cache.
Flow Age
Related Commands
(not applicable for BNG)
DescriptionCommand
Displays inconsistency information for the QoS policy on
an interface.
show qos inconsistency (BNG), on page 491
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
503
QOS Commands
show qos interface (BNG)

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model