Cisco ASR 9000 Series Command Reference

Command History
ModificationRelease
This command was introduced.Release 3.7.2
The command was supported in dynamic template configuration mode
in BNG.
The np keyword was introduced.
Release 4.3.0
PWHE interface type PW-Ether and PW-IW were added.Release 5.1.1
Usage Guidelines
To enter the dynamic template configuration mode, run dynamic-template command in the Global
Configuration mode.
Task ID
OperationsTask ID
read, writeqos
Examples
This example shows the results of the command to show interfaces at location 0/1/CPU0 for a
shared-policy-instance:
RP/0/RSP0/CPU0:router# show qos summary shared-policy-instance bundlespi location 0/1/CPU0
output
List of interfaces/NPs retrieved
GigabitEthernet0/1/1/1 (member of Bundle-Ether1.1)
GigabitEthernet0/1/1/2 (member of Bundle-Ether1.1)
This example shows policer interface statistics of BVI interface at location 0/5/cpu0:
RP/0/RSP0/CPU0:router# show qos summary police interface bvi 1 output location 0/5/cpu0 np
np1
Legend:
=======
1. Policer ID is displayed in HEX.
2. A '*' against the counter means the action is drop.
3. Conform displays match counter for non-policer leaf.
Policy:Class PoliceID Conform Exceed Violate
BVI1 NP1
foo
:dscp48 6145 0 0* 0*
foo
:class-default 6146 0 0* 0*
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
507
QOS Commands
show qos summary BNG

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model