Cisco ASR 9000 Series Command Reference

Connection ID = 0x1
Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_DHCP
Activate Required = FALSE
Config Set ID = 1
Registration Handle = 0x3
whichevent[0] = SUBDB_CB_EVENT_NONE
whichevent[1] = SUBDB_CB_EVENT_ALL
Feature State = SUBDB_FEATURE_REGISTERED
Client Connection Identifier: 0x2
=====================================
ref_count = 2
req_count = 0
bpi_reg_count = 0
spi_reconciled = TRUE
bpi_reconciled = TRUE
client_restarted = FALSE
client_name = iedge SVM
timer_running = FALSE
spi_cb_info:
SUBDB_SPI_CB_PROD_ALL_DONE = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_PROD_DONE = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_ACTIVATED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_CREATED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_DESTROYED = SUBDB_CB_EVENT_NONE
SUBDB_SPI_CB_SESSION_ASSOCIATED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_UNASSOCIATED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_SESSION_CONFIG_CHANGED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_TEMPLATE_INSTALLED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_TEMPLATE_UNINSTALLED = SUBDB_CB_EVENT_ALL
SUBDB_SPI_CB_OBJECT_AGEOUT = SUBDB_CB_EVENT_ALL
Persistent Information:
in_use = TRUE
forced_full_resync = FALSE
client_flags = TMPL_PROD, SESS_PROD
state = SUBDB_CLIENT_FULL
instance_no = 1
num_bpi_regs = 0
num_send_drop_bpi_msg = 0
num_send_drop_spi_msg = 0
num_recv_drop_bpi_msg = 0
num_recv_drop_spi_msg = 0
num_sent_bpi_msg = 0
num_sent_spi_msg = 0
num_recv_bpi_msg = 0
num_recv_spi_msg = 1
num_sent_pulse = 0
SPI AIPC Information:
conn_present = 1
tx_attempt_count = 0
tx_count = 0
rx_count = 2
notify_connect_count = 0
notify_queue_high_count = 0
notify_queue_low_count = 0
notify_queue_full_count = 0
notify_data_waiting_count = 2
notify_error_count = 0
notify_close_count = 0
notify_sendstatus_count = 0
notify_open_count = 1
pulse_data_waiting_count = 0
queue_full = 0
queue_full_drop = 0
outstanding_buffers = 0
overflow_queue_size = 0
cumulative_overflow_msgs = 0
hwm_overflow_msgs = 0
BPI AIPC Information:
Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Command Reference, Release
5.2.x
543
Subscriber Commands
show subscriber database

Cisco ASR 9000 Series Specifications

General

Series	ASR 9000
Category	Network Router
Modular Design	Yes
Redundancy	Yes (Hardware and Software)
Operating System	Cisco IOS XR
Interfaces/Ports	10G, 40G, 100G, 400G Ethernet
Expansion Slots	Varies by model
Routing Protocol	BGP, OSPF, IS-IS, EIGRP
Management	CLI, SNMP, NETCONF
Power Supply	Redundant
Port Density	Varies by model
Power Supply Options	AC, DC
Memory	Varies by model
Storage	Varies by model
Dimensions	Varies by model
Weight	Varies by model