8-41
Cisco Customer Response Solutions Administration Guide, Release 4.1(1)
Chapter 8 Managing the Cisco CRS System
Cisco CRS Utilities
Step 3 Use the dialog box fields to specify and confirm a new password and click OK.
A warning dialog box appears.
Step 4 Click OK.
The password is applied to each node in the cluster and the accounts running
under CRSAdministrator account on all nodes; a dialog box reports the status of
the changes.
Synchronizing the CRS Administrator Password
If one or more nodes in the cluster has a CRS Administrator password that is
different than the cluster-level password, instead of setting a new password for the
cluster, you can resynchronize the passwords.
Note A red CRSAdministrator icon indicates that the password is out of sync.
To synchronize a CRSAdministrator password, complete the following steps.
Procedure
Step 1 In the CRS Admin Utility, use the checkbox to select the CRSAdminstrator
account.
Step 2 Select Option > Synchronize.
A warning dialog box appears.
Step 3 Click OK.
The password is applied to each node in the cluster where the CRSAdministrator
account is out-of-sync; a dialog box reports the status of the changes.
To Next Page
Loading...
Need help?
General
