Cisco IE-3000-8TC Administration Guide

DescriptionSetting
Displays the name of the gateway.Device Name
Connection Settings
Specify the IP address of the service provider.Provider IP Address
Specify the port of the service providerProvider Port
Specify the port of the Cisco Business Edition 3000 to which the
service provider is connected.
BE3000 Port
Show/Hide Advanced Settings
In this section, the parameters that are exposed by the service provider for editing appear on the
Cisco Business Edition 3000 Administrative Interface.
Note
Transport Type Information
From the drop-down list box, choose the outgoing transport mode.
Select one of the following:
• TCP
• UDP
Outgoing Transport
Media Information
The Session Level Bandwidth Modifier specifies the maximum
amount of bandwidth needed when all the media streams are used.
There are three Session Level Bandwidth Modifiers: Transport
Independent Application Specific (TIAS), Application Specific (AS),
and Conference Total (CT).
Select one of the following options to specify which Session Level
Bandwidth Modifier to include in the SDP portion of SIP Early Offer
or Reinvite requests.
• TIAS and AS
• TIAS only
• AS only
• CT only
SDP Session-level Bandwidth
Modifier for Early Offer and
Re-INVITEs
Check this check box to allow the Cisco Business Edition 3000 to
send an INVITE a=inactive SDP message during call hold or media
break during supplementary services.
Include Inactive SDP attribute in
mid-call media changes
Administration Guide for Cisco Business Edition 3000, Release 8.6(4)
284 OL-27022-01
Connection Settings

Cisco IE-3000-8TC Specifications

General

Switching Capacity	16 Gbps
MAC Address Table Size	8000
Uplink Ports	2 x 10/100/1000Base-T or SFP (Small Form-Factor Pluggable)
Operating Temperature	-40°C to 70°C
Mounting	DIN rail
Ports	8 x Ethernet 10/100Base-TX ports
Jumbo Frame Support	Yes