CONSOLE AI | Adding Devices (CP2) | 110
Adding a CONVERGE Pro 2 Device
You can add CONVERGE Pro 2 (CP2) devices to an existing project.
Note:
Adding a device does not make its assets (audio channels, GPIO pins, etc.) available to the project.
See Adding Channels to a Project for more information.
To add a CP2 device:
1. If you have not already done so, create or open a CP2 project.
2.
From the toolbar, click .
The Devices dialog box appears:
3. Click Add Device.
The Add Devices dialog box appears:
CONSOLE AI User Manual
To Next Page
Loading...
