ClearOne CONVERGE Huddle - Changing Channel Properties - Voip Rx (CP2)

CONSOLE AI | Managing Channels (CP2) | 239
11.Check the Enable Noise Canceller check box to turn this feature on.
12.You can change the cancellation depth in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
13.Click Close.
ClearEffect
14.To enable or disable ClearEffect, click the ClearEffect button.
If the feature is turned on the button changes to light green.
Automatic Level Control (ALC)
15.To enable or disable ALC, click the ALC button.
If the feature is turned on the button changes to light green.
Mute
16.To mute this channel, click the Mute button (the button changes to red if the channel is muted).
Gain
17.You can change the gain in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
Changing Channel Properties - VoIP Rx (CP2)
You can use channel properties to modify a VoIP Rx channel. You can make any of the following changes:
Feature Description
VoIP Device Properties VoIP settings for this channel.
Gain Gain adjusts the input volume level for a VoIP channel in increments of
0.5dB.
Mute Mute a channel.
CONSOLE AI User Manual