CONSOLE AI | Managing Channels (CP2) | 258
28.To activate the limiter, click the Limiter Enable check box.
29.Adjust the limiter threshold in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
30.Click Close.
Mic/Line Switch
31.To set the output channel to line level, set the Mic/Line Switch to Line. To set the output channel to mic
level, set the Mic/Line Switch to Mic.
Changing Channel Properties - Speaker (CP2)
You can use channel properties to modify a Speaker channel.
You can make any of the following changes:
Feature Description
Active (Group only) Lets you choose which member of the group to show or modify.
Sync All (Group only) Lets you synchronize all the members of the group to match the settings
of the active member.
Delivery (Dante only) Lets you associate a Mic/Line Input channel with a Dante channel, so
you can use the Mic/Line Input channel as a digital input.
Note:
This feature is available only if you have a Dante-enabled device
in your stack (a device that has a “D” at the end of the model
name).
Filter Filters enable you to shape the audio signals from mic inputs channels
for improved audio quality. Up to four filters can be added to a mic input
channel. Available filter types are All Pass, High Pass, Low Pass, Notch,
and Parametric Equalizer (PEQ).
Compressor A compressor lets you change the gain transfer characteristics of the
signal path and control the dynamics of a signal.
CONSOLE AI User Manual
To Next Page
Loading...
