CONSOLE AI | Online Mode (CP2) | 294
Change Device Settings
4.
To view the device settings for a device, click next to that device.
The Device Settings dialog box for that device appears. See Changing CP2 Device Settings - General,
Changing CP2 Device Settings - Network, Changing CP2 Device Settings - VoIP, Changing CP2
Device Settings - IP Phone (VoIP/SIP), or Changing CP2 Device Settings - Telco for more information.
5.
To restart all the devices in the stack, click next to a device.
The Confirm Reset dialog box appears:
6. To reboot the stack devices, click Yes.
Note:
Restarting a device does not remove any device settings you have changed for the device. If
you want to remove all device settings, you must restore the device to factory defaults. See
Restoring a Stack to Factory Defaults (CP2) for more information.
Loading a Project File to a Device or Stack (CP2)
Before a CONVERGE Pro 2 device can function, it must have a project file loaded. Once you have
configured project settings, you can load a project file to the device or stack.
To load a project file to a device or stack:
1. If you have not already done so, connect to a stack.
For more information about connecting to a stack, see Connecting to a Device or Stack (CP2).
2. From the Navigation Panel, select Load.
The Load screen appears:
CONSOLE AI User Manual
To Next Page
Loading...
