CONSOLE AI | Online Mode (CP2) | 300
3. Under Stack in the Admin screen, click Restart.
The Confirm Reset dialog box appears:
4. To reboot all the devices in the stack, click Yes.
Note:
Restarting a device does not remove any device settings you have changed for the device. If
you want to remove all device settings, you must restore the device to factory defaults. See
Restoring a Stack to Factory Defaults (CP2) for more information.
All devices in the stack are restarted and you are disconnected from the stack. You must reconnect to
perform any further operations. See Connecting to a Device or Stack (CP2) for more information.
Restoring a Stack to Factory Defaults (CP2)
You can restore all the devices in a stack to factory defaults.
To restore all the devices in a stack to factory defaults:
1. If you have not already done so, connect to a stack.
For more information about connecting to a stack, see Connecting to a Device or Stack (CP2).
2. From the Navigation Panel, select Admin.
The Admin screen appears:
CONSOLE AI User Manual
To Next Page
Loading...
