CONSOLE AI | Online Mode (Huddle) | 274
Connecting to a Device (Huddle)
You can connect to a Huddle device. Doing so lets you work in online mode, which provides you with
different options. See Online Mode vs. Offline Mode for more information.
To connect to a Huddle device:
1. From the Navigation Panel, click Home.
The Home screen appears:
2. If you haven’t already done so, select CONVERGE Huddle next to Product Filter.
All discovered Huddle devices are listed under Discovered on current LAN subnet. Devices that have
been connected to the CONSOLE recently are shown under Recent Connections.
Note:
If the device you want to connect to is not shown, check the following: a) make sure device is
turned on; b) make sure the device is on the same subnet as your computer (this can include
connecting via the USB connection on the front of the device); c) if you aren’t connecting using
a USB cable, make sure are connected to the network. If you have checked all these and the
device is still not shown, you can also try to connect to the device by IP address. See Direct
Connect below for more information.
3. Select a device to connect to from the Discovered on current LAN subnet or Recent Connections
lists.
If the device you want to connect to doesn’t appear, and you want to add a device manually, skip to the
Direct Connect section below.
4. Click Connect.
The Authenticate dialog box appears:
CONSOLE AI User Manual
To Next Page
Loading...
