CONSOLE AI | Adding Partitions, Channels, and GPIO Settings (CP2) | 156
Chapter 6
Adding Partitions, Channels, and GPIO Settings
(CP2)
Topics:
• Using Partition Manager (CP2)
• Adding Channels to a Project
• Releasing Channels from a
Project
• Naming Channels using
Channel Names/Naming Tool
(CP2)
• Assigning Channels to Channel
Groups
• Changing GPIO Configuration
This chapter contains information about adding room partitions,
channels, and channel groups to a project and setting GPIO options.
Note:
The options described in this chapter are accessible only
when the CONSOLE AI is in offline mode (not connected to a
device or stack). See Online Mode vs. Offline Mode for more
information.
CONSOLE AI User Manual
To Next Page
Loading...
