ClearOne CONVERGE Huddle - Changing Channel Properties - Bluetooth Tx (CP2)

CONSOLE AI | Managing Channels (CP2) | 271
The VoIP Transmit Channel Properties block appears:
Mute
6. To mute this channel, click the Mute button (the button changes to red if the channel is muted).
Gain
7. You can change the gain in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
Changing Channel Properties - Bluetooth Tx (CP2)
You can use channel properties to modify a USB Tx channel. You can make any of the following changes:
Feature Description
Gain Gain adjusts the input volume level for a USB input in increments of
0.5dB.
Mute Mute a channel.
To change the properties for a Bluetooth Tx channel:
1. From the Navigation panel, choose Channel Properties.
The Channel Properties screen appears.
Note:
You can also view and change the channel properties in FlowView. See Connecting Channels
Using FlowView
™
(CP2) for more information.
2. (Optional) If you’re using Advanced Room mode, choose a partition from the Partition drop-down list.
3. (Optional) Choose a preset from the Preset drop-down list.
4. Click USB Tx to open the channel list.
5. Select the channel you want to change.
The USB Tx Channel Properties block appears:
Device Properties
CONSOLE AI User Manual