CONSOLE AI | Interface | 26
Choosing Active Products
You can choose which products you will be using with the CONSOLE AI application, the first time the
application is run, or, after your initial selection, anytime thereafter in the Options.
To choose active products:
1. Run the CONSOLE AI application.
If it is the first time the application has been run, a dialog box appears to let you choose which
CONVERGE products you will be using:
2. Check which of the products you intend to use.
You must choose at least one product. You can always change your choice later, as described in the
step below.
3. After the first time the product has been run, to choose active products, from the File menu, choose
Options.
The Options dialog box appears (it can appear in one of two ways, depending on what was chosen as
active products the first time the application was run).
4. Select the products you want to be active or deselect products you no longer want to be active.
The CONSOLE AI application is restarted to show the appropriate interface for the product(s) you have
selected.
About CONSOLE AI Interface
The CONSOLE AI interface has been completely redesigned to make it easier and more intuitive to
configure and control your audio environment.
Note:
Since CONSOLE AI supports both CONVERGE Pro 2 and CONVERGE Huddle, the appearance of
the interface depends on which of these products is currently active. For information about choosing
which products are active, see Choosing Active Products.
CONSOLE AI User Manual
To Next Page
Loading...
