ClearOne CONVERGE Huddle - Changing CP2 Device Settings - IP Phone (VoIP;SIP)

CONSOLE AI | Adding Devices (CP2) | 138
Plan Description
911 | [3-7]xxx |
8[2-9]xxxxxxxxxS | 8011.L
This dial plan permits four possible sequence types:
• dialing 911
• dialing an in-office extension, in this case a 4-digit number that begins
with 3, 4, 5, 6, or 7
• dialing an 8 (to get an outside line) followed by a valid North American
10-digit sequence (a number and an area code), followed by a short
timer
• dialing an 8 (to get an outside line) followed by a 011, to initiate an
international call, followed by an arbitrary number of digits (since
international numbers can vary in length), followed by a long timer
Changing CP2 Device Settings - IP Phone (VoIP/SIP)
You can change the IP Phones settings for a CONVERGE Pro 2 device when using a VoIP/SIP server.
Note:
The maximum number of simultaneous calls that can be made depends on the number of user
agents (UAs) being used, as shown in the table below:
UAs Max Calls
1 5
2 5
3 4
4 3
5 2
To change the VoIP Phones settings for a CP2 device:
1.
From the toolbar, click .
The Devices dialog box appears:
CONSOLE AI User Manual