CONSOLE AI | Adding Devices (CP2) | 119
Adding a USB Expander
You can add a USB Expander device to a CP2 project.
Note:
See About CONVERGE Expanders for more information.
To add a USB Expander device:
1. If you have not already done so, create or open a CP2 project.
2.
From the toolbar, click .
The Devices dialog box appears:
3. Click Add P-Link Device for the CONVERGE Pro 2 to which the USB Expander is attached.
CONVERGE Pro 2 connects to the USB Expander using a proprietary P-Link connection.
The Add Device dialog box appears:
CONSOLE AI User Manual
To Next Page
Loading...
