CONSOLE AI | Configuration - Offline (Huddle) | 101
Option Description
Gain (dB) The gain value for the filter you are configuring. Range is from -15 to
15dB. The default is 0dB.
Q Quality factor. the ratio of the center frequency divided by the
bandwidth. Q is the inverse of bandwidth, and the two parameters are
linked. Therefore changing the Q value also changes the bandwidth
value. Range is from 0.18 to 28.85.
Bandwidth The difference between the upper and lower points of a filter’s audio
passband. Bandwidth is the inverse of Q, and the two parameters are
linked. Hence changing the bandwidth value also changes the Q value.
The range is 0.05 to 5.00 octaves.
7. (Optional) Alternatively, you can drag the filter nodes in the filter graph to change some filter option
values.
8. Repeat the process for each filter you want to add.
9. Click Close.
Mute
10.To mute this channel, click the Mute button (the button changes to red if the channel is muted).
Gain
11.You can change the gain in any of the following ways:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
Polarity
12.To reverse the polarity of the speaker channel, click the Polarity button.
If the polarity is reversed the button turns light green.
13.Click Close.
Changing Channel Properties - Speaker (Huddle)
You can use channel properties to modify a Speaker channel.
You can make any of the following changes:
Feature Description
Active (Group only) Lets you choose which member of the group to show or modify.
Auto Sync Automatically sync every channel in the group when you make changes
to one channel.
Sync All (Group only) Lets you synchronize all the members of the group to match the settings
of the active member.
Mute Mute a channel.
Gain Gain adjusts the volume level for a processing block in increments of
0.5dB.
Polarity Reverses the polarity of a speaker channel.
EQ Filter Adjusts specific frequency bands within a +/-12db range.
CONSOLE AI User Manual
To Next Page
Loading...
