CONSOLE AI | Macros and Timers (CP2) | 173
3. Type a name for the macro in the Macro Name field.
4. (Optional) Type a description for the macro in the Macro Description field.
5. Click OK.
Open an Existing Macro
6. Alternatively, you can open an existing macro by clicking Open.
The Select Macro to Edit dialog box appears:
7. Select a macro to open from the Macro drop-down list.
8. Click OK.
Record Commands Using FlowView
9. To record macro commands using FlowView, click the FlowView tab.
10.(Optional) If you are using Advanced Room operation mode, choose a partition from the Partition drop-
down list.
11.(Optional) If you’re using presets, choose a preset from the Preset drop-down list.
12.Use FlowView to make whatever changes you want to be added to the macro. See Connecting
Channels Using FlowView
™
(CP2) for more information about using FlowView.
13.(Optional) To see which commands have been added to the macro, click the View Macro control on the
right side of the FlowView screen.
14.When you are done recording commands, click Close.
Record Commands Using MatrixView
15.To record macro commands using MatrixView, click the MatrixView tab.
16.(Optional) If you are using Advanced Room operation mode, choose a partition from the Partition drop-
down list.
17.(Optional) If you’re using presets, choose a preset from the Preset drop-down list.
CONSOLE AI User Manual
To Next Page
Loading...
