CONSOLE AI | Managing Channels (CP2) | 214
Option Description
Note:
This meter functions only if the application is in online mode.
Total Echo Reduction Meter A meter that shows the total echo reduction (ERL + ERLE). This
is an average meter that updates when a receive-only signal is
present.
Note:
This meter functions only if the application is in online mode.
15.Click Close.
Noise Cancellation
16.To turn noise cancellation on or off, click the NC button (the button changes to light green if NC is on).
The Noise Canceller dialog box appears:
17.Check the Enable Noise Canceller check box to turn on NC.
18.Use any of the following methods to change the cancellation depth:
• Drag the slider
• Type a value in the text box
• Click the incrementer and decrementer arrows beside the text box to set the value
19.Click Close
Mute
20.To mute this channel, click the Mute button (the button changes to red if the channel is muted).
Filter
21.To enable and configure a filter, click the Filter button.
The Filters dialog box appears:
CONSOLE AI User Manual
To Next Page
Loading...
