CONSOLE AI | Managing Channels (CP2) | 267
The Channel Properties screen appears.
Note:
You can also view and change the channel properties in FlowView. See Connecting Channels
Using FlowView
™
(CP2) for more information.
2. Click BMA CT Speaker to open the channel list.
3. Select the channel you want to change.
The BMA CT Speaker Channel Properties block appears:
Filter
4. To enable and configure a filter, click the Filter button.
The Filters dialog box appears:
5. For one of the available filters, choose a filter type from the Type drop-down list (see the table below for
a brief description of the available filter types).
CONSOLE AI User Manual
To Next Page
Loading...
