CONSOLE AI | Online Mode (CP2) | 292
You can also:
• Locate a device
• See a device’s network information
• Reset a device
• Change device settings
To view equipment details about the devices in a stack:
1. If you have not already done so, connect to a device or stack.
For more information about connecting to a stack, see Connecting to a Device or Stack (CP2).
2. From the Navigation Panel, select Equipment.
The Equipment screen appears:
All devices in the stack are listed here. You can see the details about any particular device. If you are
looking at a stack, the device to which you are currently logged in has the icon next to it.
Locate Device
3.
To locate a particular device by causing its Locate LED light to blink, click next to that device.
The Locate light on the device will blink, and the Locate LED light in the CONSOLE becomes solid: .
View Network Settings
4.
To view the network information for a device, click next to that device.
The Network Information dialog box appears:
5. Click Close to close the Network Information dialog box.
Change Device Settings
6.
To view the device settings for a device, click next to that device.
CONSOLE AI User Manual
To Next Page
Loading...
