CONSOLE AI | Interface | 45
5.
To find out more about any particular option, click to the right of that option.
6.
To go directly to the part of the interface that corresponds to an item in the checklist, click to the right
of that item.
7. To check off an item you have already completed, click the box to the left of that item to add a check
mark.
8. To make an item as ignore (something not checked in project audit), click the box to the left of that item
twice so that an X appears in the box rather than a check mark.
9. To check your project for any errors, click Run Project Audit.
Note:
You can also run a project audit by clicking in the toolbar. See Using Project Audit (CP2) for
more information.
A project audit is run, and any possible project warnings or errors are listed:
10.
To see more details about a particular warning or error in the list, click the icon next to a warning.
You are shown information about that item, such as in this example:
CONSOLE AI User Manual
To Next Page
Loading...
