D-Link DWL-3500AP

MAC Database Commands 115
2 Switching Commands
no bridge aging-time
This command sets the forwarding database address aging timeout to the default value.
Format
no bridge aging-time
Mode Global Config
show forwardingdb agetime
This command displays the timeout for address aging. In an IVL system, the [fdbid | all]
parameter is required.
Default all
Format
show forwardingdb agetime [fdbid | all]
Mode Privileged EXEC
Forwarding DB ID Fdbid (Forwarding database ID) indicates the forwarding database
whose aging timeout is to be shown. The all option is used to display the
aging timeouts associated with all forwarding databases. This field displays
the forwarding database ID in an IVL system.
Agetime In an IVL system, this parameter displays the address aging timeout for the
associated forwarding database.
show mac-address-table multicast
This command displays the Multicast Forwarding Database (MFDB) information. If you enter
the command with no parameter, the entire table is displayed. You can display the table entry
for one MAC Address by specifying the MAC address as an optional parameter.
Format
show mac-address-table multicast <macaddr>
Mode Privileged EXEC
MAC Address A multicast MAC address for which the switch has forwarding and or filter-
ing information. The format is two-digit hexadecimal numbers separated by
colons, for example 01:23:45:67:89:AB. In an IVL system the MAC address
will be displayed as a MAC address and VLAN ID combination of 8 bytes.
Type The type of the entry. Static entries are those that are configured by the end
user. Dynamic entries are added to the table as a result of a learning process or
protocol.
Component The component that is responsible for this entry in the Multicast Forwarding
Database. Possible values are IGMP Snooping, GMRP, and Static Filtering.
Description The text description of this multicast table entry.
Interfaces The list of interfaces that are designated for forwarding (Fwd:) and filtering
(Flt:).
Forwarding Interfaces The resultant forwarding list is derived from combining all the com-
ponent’s forwarding interfaces and removing the interfaces that are listed as
the static filtering interfaces.