D-Link DWL-3500AP - Spanning-Tree Hello-Time; Spanning-Tree Max-Age

44 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format spanning-tree forward-time <4-30>
Mode Global Config
no spanning-tree forward-time
This command sets the Bridge Forward Delay parameter for the common and internal
spanning tree to the default value.
Format
no spanning-tree forward-time
Mode Global Config
spanning-tree hello-time
This command sets the Admin Hello Time parameter to a new value for the common and
internal spanning tree. The hello time
<value> is in whole seconds within a range of 1 to 10,
with the value being less than or equal to (Bridge Max Age / 2) - 1.
Default 2
Format
spanning-tree hello-time <1-10>
Mode Interface Config
no spanning-tree hello-time
This command sets the admin Hello Time parameter for the common and internal spanning
tree to the default value.
Format
no spanning-tree hello-time
Mode Interface Config
spanning-tree max-age
This command sets the Bridge Max Age parameter to a new value for the common and
internal spanning tree. The max-age value is in seconds within a range of 6 to 40, with the
value being less than or equal to 2 x (Bridge Forward Delay - 1).
Default 20
Format
spanning-tree max-age <6-40>
Mode Global Config
no spanning-tree max-age
This command sets the Bridge Max Age parameter for the common and internal spanning tree
to the default value.
Format
no spanning-tree max-age
Mode Global Config