52 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format show spanning-tree mst summary
Modes Privileged EXEC
User EXEC
MST Instance ID List List of multiple spanning trees IDs currently configured.
For each MSTID:
Associated FIDs List of forwarding database identifiers associated with this instance.
Associated VLANs List of VLAN IDs associated with this instance.
show spanning-tree summary
This command displays spanning tree settings and parameters for the switch. The following
details are displayed on execution of the command.
Format
show spanning-tree summary
Modes Privileged EXEC
User EXEC
Spanning Tree Adminmode Enabled or disabled.
Spanning Tree Version Version of 802.1 currently supported (IEEE 802.1s, IEEE 802.1w, or
IEEE 802.1d) based upon the Force Protocol Version parameter.
Configuration Name Identifier used to identify the configuration currently being used.
Configuration Revision Level Identifier used to identify the configuration currently being
used.
Configuration Digest Key Identifier used to identify the configuration currently being used.
MST Instances List of all multiple spanning tree instances configured on the switch
show spanning-tree vlan
This command displays the association between a VLAN and a multiple spanning tree
instance. The
<vlanid> corresponds to an existing VLAN ID.
Format
show spanning-tree vlan <vlanid>
Modes Privileged EXEC
User EXEC
VLAN Identifier The VLANs associated with the selected MST instance.
Associated Instance Identifier for the associated multiple spanning tree instance or “CST” if
associated with the common and internal spanning tree.
VLAN Commands
This section describes the commands you use to configure VLAN settings.
To Next Page
Loading...
