Switch Managed Access Point Commands 195
4 Wireless Commands
WLAN Bytes Transmitted Total bytes transmitted by the AP on the wireless network.
Ethernet Packets Received Total packets received by the AP on the wired network.
Ethernet Bytes Received Total bytes received by the AP on the wired network.
Ethernet Multicast Packets Received Total multicast packets received by the AP on the
wired network.
Ethernet Packets Transmitted Total packets transmitted by the AP on the wired network.
Ethernet Bytes Transmitted Total bytes transmitted by the AP on the wired network.
Total Transmit Errors Total transmit errors detected by the AP on the wired network.
Total Receive Errors Total receive errors detected by the AP on the wired network.
show wireless ap radio statistics
This command displays statistics for each physical radio on a switch managed AP, the
managed AP MAC address and radio parameters are required, the command displays a
detailed view of the current statistics.
Format
show wireless ap <macaddr> radio <1-2> statistics
Mode Privileged EXEC
macaddr Switch managed AP MAC address.
1-2 The radio interface on the AP.
MAC Address The Ethernet address of the switch managed AP.
Location A description for the AP, this is the value configured in the valid AP database
(either locally or on the RADIUS server).
Radio Indicates a radio interface on the AP.
WLAN Packets Received Total packets received by the AP on this radio interface.
WLAN Bytes Received Total bytes received by the AP on this radio interface.
WLAN Packets Transmitted Total packets transmitted by the AP on this radio interface.
WLAN Bytes Transmitted Total bytes transmitted by the AP on this radio interface.
Transmitted Fragment Count Count of acknowledged MPDU with an individual address or
an MPDU with a multicast address of type Data or Management.
Multicast Transmitted Frame Count Count of successfully transmitted MSDU frames
where the multicast bit is set in the destination MAC address.
Failed Count Number of times an MSDU is not transmitted successfully due to transmit
attempts exceeding either the short retry limit or the long retry limit.
Retry Count Number of time an MSDU is successfully transmitted after one or more
retries.
Multiple Retry Count Number of times an MSDU is successfully transmitted after more
than one retry.
Frame Duplicate Count Number of times a frame is received and the Sequence Control field
indicates it is a duplicate.
To Next Page
Loading...
