System Information and Statistics Commands 267
6 Utility Commands
GMRP Learned—The value of the corresponding was learned via GMRP and
applies to Multicast.
Other—The value of the corresponding instance does not fall into one of the
other categories.
If you enter the
interface <slot/port> parameter, in addition to the MAC Address and
Status fields, the following field appears:
VLAN ID The VLAN on which the MAC address was learned.
The following information displays if you enter the
count parameter:
Dynamic Address count Number of MAC addresses in the forwarding database that were
automatically learned.
Static Address (User-defined) count Number of MAC addresses in the forwarding database
that were manually entered by a user.
Total MAC Addresses in use Number of MAC addresses currently in the forwarding data-
base.
Total MAC Addresses available Number of MAC addresses the forwarding database can
handle.
show running-config
Use this command to display or capture the current setting of different protocol packages
supported on the switch. This command displays or captures commands with settings and
configurations that differ from the default value. To display or capture the commands with
settings and configurations that are equal to the default value, include the
[all] option.
NOTE: Show running-config does not display the User Password, even if you set one
different from the default.
The output is displayed in script format, which can be used to configure another switch with
the same configuration. If the optional
<scriptname> is provided with a file name extension
of “.scr”, the output is redirected to a script file.
NOTE: If you issue the show running-config command from a serial connection,
access to the switch through remote connections (such as Telnet) is suspended
while the output is being generated and displayed.
Format
show running-config [all | <scriptname>]
Mode Privileged EXEC
show sysinfo
This command displays switch information.
Format
show sysinfo
Mode Privileged EXEC
Switch Description Text used to identify this switch.
To Next Page
Loading...
