218 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Captive Portal Interface Commands
Use the commands in this section to view information about the interfaces on the switch that
are associated with captive portals or that are capable of supporting a captive portal.
show captive-portal interface configuration status
This command displays the interface to configuration assignments for all captive portal
configurations or a specific configuration.
Format
show captive-portal interface configuration [cp-id] status
Mode Privileged EXEC
Intf Valid slot and port number separated by forward slashes.
Intf Description Describes the interface.
CP ID Shows the captive portal ID the connected client is using.
CP Name Shows the name of the captive portal the connected client is using.
Type Shows the type of interface.
show captive-portal interface capability
This command displays all the captive portal eligible interfaces or the interface capabilities for
a specific captive portal interface.
Format
show captive-portal interface capability [slot/port]
Mode Privileged EXEC
Intf Valid slot and port number separated by forward slashes.
Intf Description Describes the interface.
Type Shows the type of interface.
To Next Page
Loading...
