D-Link DWL-3500AP

192 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
show wireless ap radio power status
This command displays the manual power adjustment status for a radio on a switch managed
AP. This indicates the individual AP status for a wireless power plan apply request or a
wireless ap power set request.
Format
show wireless ap <macaddr> radio <1-2> power status
Mode Privileged EXEC
macaddr Switch managed AP MAC address.
1-2 Radio Interface.
Transmit Power If the radio is operational, the current transmit power for the radio.
Manual Power Adjustment Status Indicates the current state of a manual request to change
the power setting on this radio.
show wireless ap radio vap status
This command displays the operational status for switch managed AP Virtual AP (VAP)
interfaces. If no parameters are specified, a summary of all VAPs for a managed AP is
displayed. If a VAP ID is specified, the detailed status is displayed.
Format
show wireless ap <macaddr> radio <1-2> vap [<0-7>] status
Mode Privileged EXEC
macaddr Switch managed AP MAC address
1-2 The radio interface on the AP
0-7 VA P ID
MAC Address The Ethernet address of the switch managed AP.
Location A location description for the AP, this is the value configured in the valid AP
database (either locally or on the RADIUS server).
Radio Indicates a radio interface on the AP.
VA P I D The integer ID used to identify the VAP (0-7), this is used to uniquely identify
the VAP for configuration via CLI/SNMP.
VAP MAC Address The Ethernet address of the VAP.
SSID Indicates the network assigned to the VAP. The network for each VAP is con-
figured within the AP profile and the SSID is based on the network configura-
tion.
Client Assoc Indicates the total number of clients currently associated to the VAP.
show wireless ap radio neighbor ap status
This command displays the status parameters for each neighbor AP detected through an RF
scan on the specified managed AP radio.