D-Link DWL-3500AP

Port-Based Network Access Control Commands 79
2 Switching Commands
show authentication
This command displays the ordered authentication methods for all authentication login lists.
Format
show authentication
Mode Privileged EXEC
Authentication Login List The authentication login listname.
Method 1 The first method in the specified authentication login list, if any.
Method 2 The second method in the specified authentication login list, if any.
Method 3 The third method in the specified authentication login list, if any.
show authentication users
This command displays information about the users assigned to the specified authentication
login list. If the login is assigned to non-configured users, the user “default” will appear in the
user column.
Format
show authentication users <listname>
Mode Privileged EXEC
User The user assigned to the specified authentication login list.
Component The component (User or 802.1x) for which the authentication login list is
assigned.
show dot1x
This command is used to show a summary of the global dot1x configuration, summary
information of the dot1x configuration for a specified port or all ports, the detailed dot1x
configuration for a specified port and the dot1x statistics for a specified port - depending on
the tokens used.
Format
show dot1x [{summary {<slot/port> | all} | detail <slot/port> |
statistics <slot/port>]
Mode Privileged EXEC
If you do not use any of the optional parameters, the global dot1x configuration summary is
displayed.
Administrative mode Indicates whether authentication control on the switch is enabled or
disabled.
Supplicant Allowed in Guest VLAN Indicates whether the Guest VLAN for supplicants
feature is enabled or disabled.
Example:
The following shows example CLI display output for the command.
(DWS-3026) #show dot1x
Administrative Mode............... Disabled
Supplicant Allowed In Guest Vlan.. Disabled