34 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
D-Link Unified Access System CLI Command Reference
Command Completion and Abbreviation
Command completion finishes spelling the command when you type enough letters of a
command to uniquely identify the command keyword. Once you have entered enough letters,
press the SPACEBAR or TAB key to complete the word.
Command abbreviation allows you to execute a command when you have entered there are
enough letters to uniquely identify the command. You must enter all of the required keywords
and parameters before you enter the command.
CLI Error Messages
If you enter a command and the system is unable to execute it, an error message appears.
Table 7 describes the most common CLI error messages.
CLI Line-Editing Conventions
Table 8 describes the key combinations you can use to edit commands or increase the speed of
command entry. You can access this list from the CLI by entering
help from the User or
Privileged EXEC modes.
Table 7. CLI Error Messages
Message Text Description
% Invalid input detected at '^'
marker.
Indicates that you entered an incorrect or unavail-
able command. The carat (^) shows where the
invalid text is detected. This message also appears if
any of the parameters or values are not recognized.
Command not found / Incomplete
command. Use ? to list commands.
Indicates that you did not enter the required key-
words or values.
Ambiguous command
Indicates that you did not enter enough letters to
uniquely identify the command.
Table 8. CLI Editing Conventions
Key Sequence Description
DEL or Backspace Delete previous character
Ctrl-A Go to beginning of line
Ctrl-E Go to end of line
Ctrl-F Go forward one character
Ctrl-B Go backward one character
Ctrl-D Delete current character
Ctrl-U, X Delete to beginning of line
Ctrl-K Delete to end of line
Ctrl-W Delete previous word
Ctrl-T Transpose previous character
To Next Page
Loading...
