D-Link DWL-3500AP

Port-Channel/LAG (802.3ad) Commands 91
2 Switching Commands
port lacptimeout (Interface Config)
This command sets the timeout on a physical interface of a particular device type (actor or
partner) to either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Interface Config
no port lacptimeout
This command sets the timeout back to its default value on a physical interface of a particular
device type (actor or partner).
Format
no port lacptimeout {actor | partner}
Mode Interface Config
port lacptimeout (Global Config)
This command sets the timeout for all interfaces of a particular device type (actor or partner)
to either long or short timeout.
Default long
Format
port lacptimeout {actor | partner} {long | short}
Mode Global Config
no port lacptimeout
This command sets the timeout for all physical interfaces of a particular device type (actor or
partner) back to their default values.
Format
no port lacptimeout {actor | partner}
Mode Global Config
port-channel adminmode
This command enables a port-channel (LAG). The option all sets every configured port-
channel with the same administrative mode setting.
Format
port-channel adminmode [all]
Mode Global Config
no port-channel adminmode
This command disables a port-channel (LAG). The option all sets every configured port-
channel with the same administrative mode setting.
Format
no port-channel adminmode [all]
Mode Global Config