Wireless Network Commands 167
4 Wireless Commands
number of characters required for a valid WEP key, and therefore changing the WEP key
length will reset all keys.
Default ASCII
Format
wep key type {ascii | hex}
Mode Network Config
ascii Set WEP key type to ASCII.
hex Set WEP key type to hexadecimal.
no wep key type
The no version of this command returns the WEP key type to its default value.
Format
no wep key type
Mode Network Config
wep key length
This command configures the WEP key length in bits for the network. The configured key
length is used when the network security mode is set to WEP shared key. The WEP key length
affects the number of characters required for a valid WEP key, and therefore changing the
WEP key length will reset all keys.
Default 128
Format
wep key length {64 | 128 | 152}
Mode Network Config
no wep key length
The no version of this command returns the WEP key length to its default value.
Format
no wep key length
Mode Network Config
clear (Network Config Mode)
This command restores a network configuration to default values.
Format
clear
Mode Network Config
show wireless network
This command displays the network configuration parameters. If no parameters are specified,
a summary of the configured networks is displayed, otherwise the detailed configuration is
displayed.
Format
show wireless network [<1-64>]
To Next Page
Loading...
