168 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Mode Privileged EXEC
SSID Service Set Identifier
Default VLAN Default VLAN for the network.
Hide SSID Mode Indicates if SSID inclusion is suppressed from the beacons.
Security Mode Indicates the authentication and encryption mode.
L3 Tunnel Mode If tunneling feature is enabled, indicates if L3 roaming is enabled on the
network.
L3 Tunnel Subnet If tunneling feature is enabled, indicates the subnet for the tunnel.
L3 Tunnel Subnet Mask If tunneling feature is enabled, indicates the network mask for the
tunnel subnet.
WPA Versions Supported Indicates the WPA versions allowed when the WPA encryption
mode is enabled.
WPA Ciphers Indicates the encryption solutions to use when the WPA encryption mode is
enabled.
MAC Authentication Mode The client MAC address authentication mode.
RADIUS use AP Profile Indicates if the AP profile RADIUS configuration or network
RADIUS configuration is used for authentication.
RADIUS Server IP IP Address of RADIUS server for authentication.
RADIUS Server Secret Configured Indicates whether a value is configured for the
RADIUS secret.
RADIUS Accounting Mode Indicates whether RADIUS accounting is enabled
WEP Transfer Key Index If WEP – Shared Key security mode is enabled, indicates which
WEP key will be used for encryption.
WEP Key Type If WEP – Shared Key security mode is enabled, specifies the type of the
WEP keys configured.
WEP Key Length If WEP – Shared Key security mode is enabled, specifies number of bits
for the WEP Keys.
WEP Key1-4 If WEP – Shared Key security mode is enabled, indicates the WEP keys con-
figured for encryption. Up to 4 keys can be configured.
WPA Key Type Specifies the type of the WPA key configured (ASCII only).
WPA Key Indicates the pre-shared secret for WPA clients.
WPA2 Pre-Authentication Mode If WPA2 encryption is enabled, indicates pre-authentica-
tion support for roaming WPA2 clients.
WPA2 Pre-Authentication Limit If WPA2 pre-authentication is enabled, specifies a limit on
the number of APs within the peer group to which one client is allowed to pre-
authenticate.
WPA2 Pre-Authentication Timeout If WPA2 pre-authentication is enabled, specifies a tim-
eout in minutes after which an AP can delete a pre-authentication that has not
been used by the client.
To Next Page
Loading...
