D-Link DWL-3500AP

174 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
no rf-scan other-channels
The no version of this command disables scanning on other channels; the radio will always
scan on its operational channel.
Format
no rf-scan other-channels
Mode AP Profile Radio Config
rf-scan sentry
This command enables dedicated RF scanning and disables normal operation of the radio. The
radio will not allow any client associations when sentry mode is enabled.
Default Disabled
Channels, all
Format
rf-scan sentry [channels {a | bg | all}]
Mode AP Profile Radio Config
channels Indicates to scan channels within specified mode/frequency.
a Perform RF scan on all 802.11a channels (5 GHz frequency).
bg Perform RF scan on all 802.11b/g channels (2.4 GHz frequency).
all Perform RF scan on all channels.
no rf-scan sentry
The no version of this command disables dedicated scanning and enables normal operation of
the radio.
Format
no rf-scan sentry
Mode AP Profile Radio Config
rf-scan duration
This command configures the RF scan duration for the radio. The duration indicates how long
the radio will scan on one channel.
Default 10 milliseconds
Format
rf-scan duration <10-2000>
Mode AP Profile Radio Config
10-2000 Time duration in milliseconds
no rf-scan duration
The no version of this command returns the configured RF scan duration to its default value.
Format
no rf-scan duration
Mode AP Profile Radio Config