DHCP and BOOTP Relay Commands 137
3 Routing Commands
no bootpdhcprelay serverip
This command configures the default server IP address for BootP/DHCP Relay on the system.
Format
no bootpdhcprelay serverip
Mode Global Config
show bootpdhcprelay
This command displays the BootP/DHCP Relay information.
Format
show bootpdhcprelay
Modes Privileged EXEC
User EXEC
Maximum Hop Count The maximum allowable relay agent hops.
Minimum Wait Time (Seconds) The minimum wait time.
Admin Mode Indicates whether relaying of requests is enabled or disabled.
Server IP Address The IP address for the BootP/DHCP Relay server.
Circuit Id Option Mode The DHCP circuit Id option which may be enabled or disabled.
Requests Received The number or requests received.
Requests Relayed The number of requests relayed.
Packets Discarded The number of packets discarded.
To Next Page
Loading...
