154 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Mode Privileged EXEC
a Configure channel plan mode for 802.11a.
bg Configure channel plan mode for 802.11b/g.
Current Status Indicates the status of a manual channel plan request.
AP MAC Address The managed AP Ethernet MAC address.
Location A descriptive location string configured for the managed AP.
Radio The radio interface on the managed AP.
Current Channel The current channel on the managed AP radio.
New Channel The new channel computed by the channel algorithm.
show wireless power-plan
This command displays status and configuration for automatic power adjustment. The
command does not accept any arguments.
Format
show wireless power-plan
Mode Privileged EXEC
Power Plan Mode The mode for automatic power adjustment, manual or interval. If the
mode is manual, the power algorithm will not run unless you request it.
Power Plan Interval If the power adjustment mode is interval, this indicates the frequency in
minutes that power adjustments are computed and applied.
show wireless power-plan proposed
This command displays the proposed power adjustments for a manual request to run the power
algorithm. The command does not accept any arguments. The proposed power changes may be
cleared or applied using the wireless power-plan command.
Format
show wireless power-plan proposed
Mode Privileged EXEC
Current Status Indicates the status of a manual power adjustment request.
AP MAC Address The managed AP Ethernet MAC address.
Location A descriptive location string configured for the managed AP.
Radio The radio interface on the managed AP.
Current Power The current transmit power on the managed AP radio.
New Power The new transmit power computed by the power algorithm.
Peer Unified Switch Commands
The commands in this section provide peer Unified Switch status.
To Next Page
Loading...
Need help?
General
