208 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
Format group <group-name>
Mode Captive Portal Instance Mode
radius accounting
This command enables radius accounting for a captive portal configuration.
Default Disable
Format
radius accounting
Mode Captive Portal Instance Mode
no radius accounting
This command disables radius accounting for a captive portal configuration.
Default Disable
Format
no radius accounting
Mode Captive Portal Instance Mode
redirect-url mode
This command enables or disables the redirect mode for a captive portal configuration.
Default Disable
Format
redirect-url mode
Mode Captive Portal Instance Mode
no redirect-url mode
This command disables the redirect mode for a captive portal configuration.
Format
no redirect-url mode
Mode Captive Portal Instance Mode
redirect-url
Use this command to specify the URL to which the newly authenticated client is redirected if
the URL Redirect Mode is enabled. This command is only available is the redirect mode is
enabled.
Format
redirect-url <url>
Mode Captive Portal Instance Mode
rate-limit up
Use this command to configure the maximum rate at which a client can send data into the
network.
To Next Page
Loading...
