EasyManua.ls Logo

D-Link DWL-3500AP

D-Link DWL-3500AP
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Access Point Profile VAP Commands 185
4 Wireless Commands
no qos station-edca
The no version of this command allows you to reset the chosen queue configuration values for
AIFS, Minimum Contention Window, Maximum Contention Window, and Transmission
Opportunity Limit.
Format
no qos station-edca {background | best-effort | video | voice} {
aifs | cwmin | cwmax | txop-limit }
Mode AP Profile Radio Config
show wireless ap profile qos
This command displays the configured values for a radio interface per QoS Queue. The
various QoS queues that can be displayed are as follows:
Background (Queue 3), lowest priority queue, high throughput.
Best Effort (Queue 2), medium priority queue, medium throughput and delay.
Video (Queue 1), highest priority queue, minimum delay.
Voice (Queue 0), highest priority queue, minimum delay.
Format
show wireless ap profile <1-16> radio <1-2> qos [{ap-edca | sta-
tion-edca}]
Mode Privileged EXEC
AP Profile ID Configured AP profile ID.
Profile Name Name associated with the AP Profile ID.
Radio Index AP profile radio interface.
Mode The configured physical mode for the radio.
WMM Mode Indicates the Wireless Multimedia mode of the radio.
Arbitration Inter-frame Spacing AP EDCA and station EDCA wait time for data frames,
ranges 1-255 milliseconds.
Minimum Contention Window AP EDCA and station EDCA upper limit of a range from
which the initial random back off wait time is determined.
Maximum Contention Window AP EDCA and station EDCA upper limit for the doubling
of the random back off value; doubling continues until either the data frame is
sent or this value is reached.
Maximum Burst Length AP EDCA maximum burst length in microseconds allowed for
packet bursts on the wireless network.
Transmission Opportunity Limit Station EDCA interval of time in milliseconds when a
WME client station has the right to initiate transmissions onto the wireless
medium.
Access Point Profile VAP Commands
The commands in this section provide Virtual Access Point (VAP) configuration per radio
interface within an access point profile.

Table of Contents

Other manuals for D-Link DWL-3500AP

Related product manuals