EasyManua.ls Logo

D-Link DWL-3500AP

D-Link DWL-3500AP
344 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
230 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
no traffic-shape
This command restores the interface shaping rate to the default value.
Format
no traffic-shape
Modes Global Config
Interface Config
show classofservice dot1p-mapping
This command displays the current Dot1p (802.1p) priority mapping to internal traffic classes
for a specific interface. The
<slot/port> parameter is optional and is only valid on platforms
that support independent per-port class of service mappings. If specified, the 802.1p mapping
table of the interface is displayed. If omitted, the most recent global configuration settings are
displayed. For more information, see “Provisioning (IEEE 802.1p) Commands” on page 64.
Format
show classofservice dot1p-mapping [<slot/port>]
Mode Privileged EXEC
The following information is repeated for each user priority.
User Priority The 802.1p user priority value.
Traffic Class The traffic class internal queue identifier to which the user priority value is
mapped.
show classofservice ip-precedence-mapping
This command displays the current IP Precedence mapping to internal traffic classes for a
specific interface. The slot/port parameter is optional and is only valid on platforms that
support independent per-port class of service mappings. If specified, the IP Precedence
mapping table of the interface is displayed. If omitted, the most recent global configuration
settings are displayed.
Format
show classofservice ip-precedence-mapping [<slot/port>]
Mode Privileged EXEC
The following information is repeated for each user priority.
IP Precedence The IP Precedence value.
Traffic Class The traffic class internal queue identifier to which the IP Precedence value is
mapped.
show classofservice ip-dscp-mapping
This command displays the current IP DSCP mapping to internal traffic classes for the global
configuration settings.
Format
show classofservice ip-dscp-mapping
Mode Privileged EXEC
The following information is repeated for each user priority.

Table of Contents

Other manuals for D-Link DWL-3500AP

Related product manuals