Wireless Network Commands 159
4 Wireless Commands
Format ssid <name>
Mode Network Config
name Service Set Identifier, must be between 1-32 alphanumeric characters. To use
spaces in the SSID, use quotes around the name.
vlan (Network Config Mode)
This command configures the default VLAN ID for the network. If there is no RADIUS server
configured or a client is not associated with a VLAN via RADIUS, this is the VLAN assigned.
Default 1 – Default VLAN
Format
vlan <1-4094>
Mode Network Config
1-4094 A valid VLAN ID.
no vlan
The no version of this command sets the default VLAN ID for the network to its default value.
Format
no vlan
Mode Network Config
hide-ssid
This command enables hiding of the SSID for this network. If enabled, the SSID is not
included in the AP beacon frames.
Default Disable
Format
hide-ssid
Mode Network Config
no hide-ssid
The no version of this command disables hiding of the SSID for this network.
Format
no hide-ssid
Mode Network Config
security mode
This command configures the authentication and encryption mode on the network.
Default none
Format
security mode {none | static-wep | wep-dot1x | wpa-enterprise |
wpa-personal}
Mode Network Config
To Next Page
Loading...
