200 © 2001- 2008 D-Link Corporation/D-Link Systems, Inc. All Rights Reserved.
CLI Command Reference
SSID Indicates the network on which the client is connected.
VAP MAC Address Indicates the Ethernet MAC address for the managed AP VAP where
this client is associated.
Channel Indicates the operating channel for the client association.
Status Indicates whether or not the client has associated and/or authenticated. The
valid values are:
Associated - The client is currently associated to the managed AP.
Authenticated - The client is currently associated and authenticated to the
managed AP.
Disassociated - The client has disassociated from the managed AP. If the cli-
ent does not roam to another managed AP within the client roam timeout, it
will be deleted.
AP MAC Address This field indicates the base AP Ethernet MAC address for the managed
AP.
Location The descriptive location configured for the managed AP.
Radio Displays the managed AP radio interface on which the client is associated.
VLAN If the client is on a VAP using VLAN data forwarding mode, indicates the
current assigned VLAN.
User Name Indicates the user name of clients that have authenticated via 802.1x. Clients
on networks with other security modes will not have a user name.
Transmit Data Rate Indicates the rate at which the client station is currently transmitting
data.
Inactive Period For current association, period of time that the AP has not seen any traffic for
the client.
Age Indicates the time in seconds since the switch has received new association
data for this client.
show wireless client statistics
This command displays association or session statistics for clients currently associated with a
switch managed AP. The session statistics show the cumulative association values if a client
roams across managed APs. If no optional parameters are specified, the session statistics are
displayed.
Format
show wireless client <macaddr> statistics [{association | session}]
Mode Privileged EXEC
macaddr Switch managed AP’s client MAC address.
MAC Address The Ethernet address of the client station.
Packets Received Total packets received from the client station.
Bytes Received Total bytes received from the client station.
Packets Transmitted Total packets transmitted to the client station.
To Next Page
Loading...
